diosoth Posted May 11, 2011 The explosive barrels. Made from a Ja-Ru brand black play slime container found at Dollar General. The green sludge is hot glue over top of junk tossed in to fill space. 0 Share this post Link to post
diosoth Posted May 11, 2011 Rockets Two 1990 Rampart missiles painted tan with a red stripe. One will probably have the peg cut off and used as a prop, the other will be altered with a flame trail to be stuck into the Cyberdemon's cannon. 0 Share this post Link to post
diosoth Posted May 11, 2011 Burning barrel. I used the same Ja-Ru play slime container as the slime barrel(I bought 2 of them some time back), painted darker gray. The flame is a Ghost Rider head. I did the same as before- filled the barrel with junk to fill space and used hot glue, leaving the flame piece on top. The glue strands were painted red/orange to simulate Hellfire lava. These barrels are decorative, showing up in Doom II only I believe(I may be wrong on this). 0 Share this post Link to post
diosoth Posted May 22, 2011 Finally finished this one. Thanks to formbx257 for suggesting the head and JoeToyFan for supplying it, and to Macrossmaster for donating the rest of the body parts used head- Mercer V1 armor- Mercenary Wraith torso- Backblast V1 arms- Backblast V1 waist- Backblast V1 thighs- Rampart feet- Backblast V1 pistol- Scarlett V8 double-barrel shotgun- Marauder Inc. I cheated by using a 25th Wraith armor but I found myself lacking in find a torso and arm combination that could match the armor I needed. I chose to mount it in place with a screw rather than glue as I wanted to leave the option open to open the torso should the o-ring ever break. However, the back of the torso is glued to the waist with a tiny drop of glue to prevent movement. I had planned to use a 25th Eel helmet but found them too small to fit on ARAH heads and scrapped it. I was also unable to find a vintage Eel head or I may have devised a way to swap heads easily. Oh well, most people are probably more familiar with the status bar face anyway. The armor was cut in the back to allow access to the hole. I plan to find a brown backpack eventually. I should note that these boots are probably more sprite-accurate than any used for my 25th customs. With the 25th version made prior- 0 Share this post Link to post
diosoth Posted May 25, 2011 The Cyberdemon will be finished soon. I bought one of these and will use its head and horns. 0 Share this post Link to post
valkiriforce Posted May 28, 2011 I would've gone nuts for this stuff as a kid. I used to collect those G.I. Joe figurines so this would definitely have impressed me (and still does). :) 0 Share this post Link to post
diosoth Posted May 28, 2011 "Classic Doom" Spc. Jack Campbell head- Gen. Hawk, comic pack armor- Wraith arms- Tomax/Xamot torso- ROC Cobra Commander legs- Gen. Hawk, comic pack knife- Gen. Hawk, comic pack plasma gun- ROC Flash backpack- Snake Eyes V40 5-pack This custom is not totally done yet. I still need to obtain a Target ROC Cobra Eel black helmet. I may also build the Doom 3 BFG-9000 if I can find suitable parts. I went with black armor, following Doom's theme of different color for different ranks, and to work around existing parts. He's still recognizable. I was going to add the Doom 3 tubing to the armor but could find no way to do so without it looking goofy so I didn't bother with it. 0 Share this post Link to post
Mithran Denizen Posted May 31, 2011 Looks pretty cool so far. I like the hooves, though that ass piece doesn't appear quite 'sculpted' enough to do the sprites justice. Or maybe I've just seen Maes' DW avatar one time too many. :-| Either way, keep it up, and what-not. 0 Share this post Link to post
40oz Posted June 8, 2011 whoa! looks really nice so far. What's the size comparison of the cyberdemon to the doom guy? The revenenat looks perfect btw 0 Share this post Link to post
diosoth Posted June 9, 2011 Some people have expressed interest in buying these. Suppose I was to offer everything in this thread as a single lot, one purchase gets everything. Any takers and what would you offer? Keep in mind, these are display pieces. They may retain some movement but not much. The paints are acrylic and prone to scratching. 0 Share this post Link to post
SYS Posted June 11, 2011 Is that a hulk figure you're using for the cyberdemon's body? 0 Share this post Link to post
xvertigox Posted July 23, 2011 Pro.as.fuck These are awesome, you have some serious skills man. 0 Share this post Link to post
Daiyu_Xiaoxiang Posted July 23, 2011 Cyberdemon wearing armor? And will there figures of Sergeant Kelly or Swann? 0 Share this post Link to post