serial

33 files

1. JEESETUP v1.38

   By Guest

   JEESETUP is a drop in replacement for DOOM, DOOM II, and HERETIC serial driver. The driver supports the Hayes ESP2, 16550, and 8250. I tested the driver with DOOM versions 1.2, 1.666, DOOM II versions 1.666, 1.7a, and HERETIC 1.0 at baud rates from 9600 to 921600. This driver's interface is written in "heads down" assembler and uses the Hayes ESP2 in enhanced mode. This eliminates output and input interrupts (a few may occur from line noise and start up overrun). Thereby reducing the CPU requirements and increasing data throughput. When playing one on one, you need every fraction of a second you can get. You get a faster CPU, local bus video (to increase the frames per second), stereo sound card and a larger monitor, just so you can have an "edge".
   

   48 downloads

      (1 review)

   Submitted February 20, 1995

2. APCiDOOM v5.6

   By Guest

   APCiDOOM v5.6 is a freeware utility for DOOM or DOOM II. It is the client software that allows high-speed modem users to play FOUR PLAYER true network modem DOOM via the APCi MultiPlayer Game Server. It features a chat utility that enables players to chat and change WAD files/settings before and between games. Supported modes are modem, serial link, and IPX. Proper operation requires DOOM v1.9 or DOOM II v1.9 or later. The MPGS is *NOT* required to use APCiDOOM.
   

   44 downloads

      (4 reviews)

   Submitted July 6, 1995

3. DWANGO v2.0 - The DOOM Wide-Area Network Game Organization!

   By Guest

   DWANGO is a revolutionary, new way to play games. It's all about networking and playing other people all around the world, no matter where they are. You can chat with each other, create teams, join teams and jump into any DOOM, DOOM2 or HERETIC world you want -- either in DeathMatch or in Co- operative mode.
   
   The problem common to networking computer games is that the other people that you want to play might not want to play at the exact same time that you do. Or, you might get tired of beating the same old person time after time because you don't know anyone else in your area with the same DOOM problem that you have. With DWANGO, you get DeathMatch-On-Command! Just dial up and challenge someone to a match -- even if it's 3:00 in the morning!
   

   12 downloads

      (6 reviews)

   Submitted June 9, 1995

4. sersrc.zip

   By Guest

   This is the source code to the serial driver for DOOM. By modifying this, you can get it to run in other mediums which require a lower BW protocol and noise immunity.
   

   11 downloads

      (0 reviews)

   Submitted April 24, 1994

5. SIRDOOM

   By Guest

   Play DOOM with up to four players via modem. SIRDOOM has a built in terminal that will allow you to call your favorite Major BBS system running the multi-player version of Game Connection (V1.45 or higher) and play DOOM, DOOM II, Heretic, or Hexen against a group of friends or acquaintances. While there, check out the other games that are playable via Game Connection.
   

   11 downloads

      (0 reviews)

   Submitted May 11, 1996

6. SDOOM

   By Guest

   a package to get Doom Serial Mode to work fine and smoothly.
   

   10 downloads

      (3 reviews)

   Submitted April 24, 1994

7. Replacement sersetup.exe for Doom 1.2

   By Guest

   This is a hack of id's serial device driver. It allows arbitrary baudrate, hardware handshaking, and arbitrary irq. This will allow you to run your V32bis modem at higher than 9600 baud. Also, some problems with dialing and answering the modem have been fixed (some modems can not accept command strings at full speed). The new structure of the modem.cfg file is described in the accompanying modem.cfg file.
   

   8 downloads

      (5 reviews)

   Submitted April 24, 1994

8. IHHD dialer software

   By Guest

   6 downloads

      (2 reviews)

   Submitted April 24, 1994

9. Parallel link driver for DOOM

   By Guest

   Emulates network over a parallel link.
   

   6 downloads

      (1 review)

   Submitted September 12, 1994

10. DOOMLoad v2.01 Alpha

    By Guest

    DOOMLOAD is intended to be run instead of the SETUP program should you wish to play multi-player or even single player games. For that matter, run this program instead of DOOM and SETUP.
    
    DOOMLOAD is intended to make setting up multi-player games easier as well as making playing more fun for network users and single players by adding a "Sudden Death" feature which plops you on a random level and episode, allowing you to select which episode and mission you start on, allowing you to record and playback your own movies, and otherwise, taking the pain out of typing -DEVPARM commands at the commandline.
    

    5 downloads

       (1 review)

    Submitted April 24, 1994

11. DOOM Serial Connection Manager v1.06b

    By Guest

    DOOM Serial Connection Manager is an alternative to using SETUP.EXE or Command Line Parameters to set up Serial Connections. It allows you to change more options than SETUP lets you do. It also allows you to have up to twenty different configurations.
    

    5 downloads

       (0 reviews)

    Submitted May 12, 1994

12. APCiHERETIC

    By Guest

    APCiHERETIC is a freeware utility for Heretic and Hexen. It is the client software that allows high-speed modem users to play Heretic and Hexen via the APCi MultiPlayer Game Server(tm). It features a chat utility that enables players to chat and change WAD files and settings before and between games. Supported modes are modem, serial link, and IPX. Proper operation requires Heretic 1.2 or later, or Hexen 1.0 or later. The MPGS is *NOT* required to use APCiHERETIC.
    

    5 downloads

       (3 reviews)

    Submitted December 11, 1995

13. DeathManager Auxiliar v1.1

    By Guest

    DeathManager Auxiliar (DMAUX.EXE) is a auxiliar program to DeathManager (DM.EXE). DeathManager is an easy-to-use interface that replaces the hassle of typing command-line parameters to SERSETUP.EXE and IPXSETUP.EXE. DeathManager comes with the Shareware and Registered versions of the DOOM, DOOM2, Heretic and Hexen.
    
    Unfortunately has a problem in the DeathManager, you can't pass a irq modem number to SERSETUP.EXE, if you have a non-usual configuration in your FAX/MODEM card, you can't use the DeathManager because SERSETUP.EXE will get a default irq number to the COM port of the your FAX/MODEM card that won't be the same that you have configurated to it. THIS MY CASE :(
    
    DeathManager Auxiliar correct this problem, when you use the DeathManager and type F10 to start the comunication, it will bypass the sersetup entrie and call DMAUX.EXE that will start SERSETUP.EXE.
    
    The DeathManager Auxiliar will pass the correct irq modem number to the SERSETUP.EXE and ALL options that DM.EXE write in the file DM$$$.TMP and you will stay happy to can use the DeathManager program.
    

    4 downloads

       (2 reviews)

    Submitted October 5, 1998

14. BNUDM version 1.2.6

    By Guest

    a replacement sersetup.exe file (the DOOM serial driver) for DOOM.
    

    4 downloads

       (1 review)

    Submitted April 18, 1994

15. MooDem v1.0

    By Guest

    Using the doom program, SETUP , you can only play over the modem at 9600 bps. Which if your phone lines are like mine, is quite SLOW. MooDem, lets you play at 57600, the most effective speed, for a 14.4 - 28.8 modem.
    

    4 downloads

       (0 reviews)

    Submitted November 11, 1994

16. sercheat 1.0 beta

    By Guest

    This is a raw beta. It has not been fully tested (that's what you beta testers are for ;) ). Go ahead and try it out. To use it, make sure both parties (you & your opponent) have this program. You may want to rename your opponent's exe file something else, or he might figure out what you're up to. This program does not work with other serial programs for Doom, however the final release will hopefully be backwards compatible with SER4. The cheating only works if you are using a saved game. If you chose to cheat, be sure to configure so that you can enable Degreelessnessmode and/or Clipping. Infinite ammo will be added in the next beta.
    

    4 downloads

       (2 reviews)

    Submitted May 13, 1994

17. JServe02.Exe - Ver 0.2 (BETA)

    By Guest

    JServe is a serial driver written specifically for the purpose of playing multi-player DOOM II Ver 1.666+. Although fairly easy to use, it was not written with the NOVICE doomer in mind. If you can't get two player DOOM to work with the supplied drivers, you probably won't get it to work with this one either. What makes this driver special is not the fancy GUI (especially since it does not yet have one) or the ability to help set every DOOM parameter under the sun, but its the ability to play 3 and 4 player DOOM using any combination of serial cables and modems. Admittedly, with my hardware 4 players is too slow to be a lot of fun, but 3 works well! And with better hardware, 4 may be fine as well. This is where all you of come in to play. I need help testing this thing on a much wider variety of hardware than I can get my hands on. So I need your help in testing this thing.
    
    JServe is a stand alone program. This means it does not require a game server of any kind, and subsequently it does not require $30+ a month for play time. JServe is, more or less, it's own client and it's own server. By daisy chaining computers together you can have a 3 or 4 player death match, play co-operatively, or even team play (2 on 2).
    
    JServe, above all else, is BETA. Please remember this if you can't get it to work with your hardware. It is yours to play with under the condition you have to report to me any problems you may have with it. :) Yes, I know, there is always a catch! You are granted permission to use this BETA through October 1995, after this time you should remove it from your system and obtain the upgrade. I hope to have made some improvements by then, time permitting of course, and I don't want old betas floating around. I retain all rights to this program.
    

    4 downloads

       (2 reviews)

    Submitted December 5, 1995

18. PARSETUP

    By Guest

    PARSETUP is a Parallel Printer Port device driver for id Software's DOOM (tm) and DOOM II (tm) which will allow two computers to play across a LapLink or InterLnk parallel cable. Just the thing if you want to play multiplayer DOOM but don't have network cards and your only serial port is taken up by your mouse.
    

    3 downloads

       (1 review)

    Submitted February 4, 1995

19. RMSetup 4.0

    By Guest

    Allows 3 or 4 players (or 2) to play DOOM by just using serial cables.
    
    As noted, you can play with just 2 players using RMSetup, however, other drivers for serial 2 player might be faster because of RMSetup's overhead in packetising the data.
    
    This program will work with Heretic, Doom2 and Doom by Id Software. And even maybe Rise of the Triad by Apogee.
    

    3 downloads

       (1 review)

    Submitted July 6, 1995

20. comsw.zip

    By Guest

    This is a simple, easy to use, COM port setup program for DOS. Type <comsw h> for help.
    

    3 downloads

       (1 review)

    Submitted April 17, 1994

21. dmodplay.zip

    By Guest

    This archive contains information about how to get serial (modem and nul-modem) connections between two computers for the purpose of playing multiplayer DOOM (which is a mighty good thing to do!:)
    
    You do NOT really need this file if you have no problems using doom in this way.
    

    3 downloads

       (0 reviews)

    Submitted July 11, 1994

22. nuser.zip

    By Guest

    Nuser.zip is a version of sersetup in DOOM1.2 which solves the problem of serial connection games slowing down after about 2mins of play
    

    3 downloads

       (1 review)

    Submitted April 24, 1994

23. dserf27.zip

    By Guest

    This is a hack of id's serial device driver. It allows arbitrary baudrate, hardware handshaking, arbitrary irq, and arbitrary port addresses. This will allow you to run your V32bis modem at higher than 9600 baud. Also, some problems with dialing and answering the modem have been fixed (some modems can not accept command strings at full speed). The new structure of the modem.cfg file is described in the accompanying modem.cfg file.
    

    3 downloads

       (1 review)

    Submitted April 24, 1994

24. HX8

    By Guest

    HX8 allows you to play Hexen, Doom or related games with up to 8 players together, and this over standard null-modem or modem links. Thanks to in-the-fly compression, it doesn't require much bandwidth (see below).
    
    It has been successfully tested with The Ultimate Doom, and, extensively, with Hexen 1.1.
    
    HX8 is an enhancement of HX3. No full documentation is included; please download HX3.TXT for full documentation.
    

    3 downloads

       (1 review)

    Submitted August 20, 1996

25. DOOM II Serial Device Driver Version 1.4 Revision 1.4.04

    By Guest

    Featuring 2 new parameters to modem play DOOM 2. With these features, you can start a deathmatch right after your gameplay negotiations with your opponent by switching your modem from voice to data connection mode without calling your opponent again.
    

    3 downloads

       (1 review)

    Submitted September 29, 1995