sound_edit

23 files

1. 8MBGM and 8MBGSFX Gravis Patch Set v1.3

   By Guest

   The files in this archive consist of a complete set of high quality Gravis format patch files that were created from EMU Technologies "8MBGM.SF2" and "8MBGSFX.SF2" SoundFont format soundbanks (E-mu Rev B).
   
   The patch set consists of 635 Gravis format patches (a total of 32,156,227 bytes of patch files) which make up a single high quality General MIDI compatable standard melodic bank, and a total of nine different General MIDI compatable drum kits (Standard, Room, Power, Electronic, TR-808, Jazz, Brush, Orchestral, and Sound Effects drum kits).
   
   These patch files can be used with the software wavetable synthesis MIDI music synthesizer "Timidity", or any program or utility that supports Gravis format patches for music synthesis (such as the native Gravis patch support included with PRBOOM, the native Timidity support included with ZDOOM, the software wavetable synthesis digital MIDI "DIGMID" music driver support included with BOOM or any other Allegro based application, or the MIDI player support of the Cubic Player).
   
   Essentially this patch set will make the MIDI music playback of any of the above mentioned applications sound highly realistic, all without the need of expensive MIDI hardware.
   

   173 downloads

      (17 reviews)

   Submitted April 21, 2004

2. bsdmidi

   By fraggle

   This is some code I wrote for Freedoom to generate a free "GENMIDI" lump for Doom. The source data is based on the register values from the OpenBSD OPL driver. The result isn't too great; the original GENMIDI is definitely miles better, but it's somewhat acceptable.
   

   18 downloads

      (4 reviews)

   Submitted February 24, 2008

3. DMaud For Windows v1.1

   By Guest

   The First Internal DOOM Audio Editor! Works with DOOM 1 and Original Sounds From DOOM II.
   

   18 downloads

      (2 reviews)

   Submitted August 21, 1995

4. DMAXIT DooM Audio eXtraction and Insertion Tool

   By Guest

   DMAXIT will store sounds into or extract sounds from DOOM2 WAD and PWAD files. It does the entire wad at one time, without the repeated dmaud entries to insert audio into your new PWADs. In addition, it will create new PWADs for you.
   
   You must have DMAUD either in your path or in the same directory as DMAXIT to run the program. I did not reinvent the wheel, I just discovered axle grease.
   
   If you thought Dmase was ok, you'll like this a lot. This was written due the shortcomings of Dmase. Good idea, poor execution.
   

   6 downloads

      (0 reviews)

   Submitted January 16, 1996

5. dmsound.zip

   By Guest

   These batch files are little utilities I threw together to make life a little easier on me. I have 2-3 versions of Doom running, and when I install a new version, and it has the bare bone sounds in there, that bugs the hell out of me. So I threw together a few things to remedy that problem. I also made a batch file to make a PWAD out of your sounds that you have in your DOOM.WAD.
   

   3 downloads

      (1 review)

   Submitted December 16, 1994

6. DOOM Audio Editor - version 1.1

   By Guest

   DMAUD will store sounds into or extract sounds from DOOM WAD and PWAD files. In addition, DMAUD will play the sound if a SoundBlaster compatible sound card is present.
   
   Patch WAD files (PWAD) can be edited the same as WAD files by using the '-f pwad' option on the command line; the PWAD will be created as needed. To remove a sound from the PWAD, use the '-r' option. For the PWAD to work correctly, the filename must end with .WAD.
   
   Please be sure that you have a backup copy of the original DOOM WAD file available.
   
   Input files can be any format (.AU, .VOC, .WAV, .SND, etc) and any sample rate; they will be converted as necessary.
   

   95 downloads

      (1 review)

   Submitted August 18, 1995

7. DOOM MUS File Player V1.75

   By Guest

   DOOM, DOOM II, Heretic & Hexen MUS file player.
   Supports Adlib, Sound Blaster (OPL2), Sound Blaster Pro II/16 (OPL3, stereo), Sound Blaster AWE32 (EMU 8000), Roland MPU-401 and Sound Blaster MIDI port. Can play music on the background. Can store MUS files into XMS or EMS to save conventional memory. Partial source included only. The full source can be found in MUSLIB 1.75 (muslb175.zip).
   

   97 downloads

      (1 review)

   Submitted May 6, 1996

8. Doom Mus Player v0.99a

   By Guest

   I have created this Doom Mus Player for only one thing: Playing Doom Music In Order Automatically Without Running Doom. Thats all.
   

   78 downloads

      (2 reviews)

   Submitted April 14, 2000

9. DOOM Music Editor

   By Guest

   DMMUSIC will store music into or extract music from DOOM WAD and PWAD files. To list the names of available music entries, use the '-L' option.
   
   Patch WAD files (PWAD) can be edited the same as WAD files by using the '-f pwad' option on the command line; the PWAD will be created as needed. To remove a music entry from a PWAD, use the '-r' option. For the PWAD to work correctly, the filename must end with .WAD.
   
   When editing the WAD file directly, please be sure that you have a backup copy of the original file available.
   
   Input files must be in .MUS format. A utility to convert MIDI files to .MUS is available seperately (MIDI2MUS).
   

   111 downloads

      (2 reviews)

   Submitted May 12, 1994

10. DooMMusic User Interface v1.0

    By Guest

    DMMUI is a front end for DMMUSIC.EXE, a program which allows you insert your own musical scores into DOOM. I've included DMMUSIC v1.0 and MIDI2MUS in the Zipfile, so you don't have to go looking for them. Hopefully their authors won't mind :)
    

    4 downloads

       (1 review)

    Submitted July 27, 1994

11. GENMIDI Replacement for Ultimate Doom and Doom II

    By Guest

    GENMID01.WAD is a tiny Doom wad which contains a replacement for the GENMIDI lump in the Doom IWAD. This lump controls the FM music synthesizer on sound cards using the Yamaha OPL2/OPL3 chip. Examples of such cards are Soundblaster, Adlib, and Pro Audio Sound. This GENMIDI replacement is designed to make the Doom music sound better.
    

    25 downloads

       (6 reviews)

    Submitted September 4, 2001

12. Hexen Sounds for Windows 3.1 or Windows 95

    By Guest

    Hexen sounds will allow you to hear the sounds from the Hexen main wad and also will help you to edit your scripts to easily insert the right sound without typing your fingers off.
    

    7 downloads

       (0 reviews)

    Submitted March 2, 1996

13. MIDI2MUS

    By Guest

    This converts general MIDI music to Paul's MUS format which goes into DOOM.
    

    36 downloads

       (29 reviews)

    Submitted May 12, 1994

14. MIDINFO.TXT

    By Guest

    This file contains detailed information about the usage of GenMIDI instruments by the songs in DOOM. (With additional info relevant to the GUS.)
    

    4 downloads

       (1 review)

    Submitted July 20, 1994

15. MODfile to MIDIfile converter

    By Guest

    Soon after my introduction to MODfiles, a mere two years ago, I became aware of their limitations. Not the least of these is their incompatibility with standard musical notation. They are also limited by the quality of their recording, and the hardware used to play them back. But there is a lot of good music in mod format, and I wanted to have access to it. I felt the need for a program to convert these MODfiles into MIDIfiles that I could play on my sound card. This would give me better quality sound, as well as allow me to view the music in standard notation, and manipulate it using the music software provided with my card. From this simple idea grew a quite complicated algorithm, with many added features. This is its first incarnation.
    

    22 downloads

       (12 reviews)

    Submitted February 14, 1995

16. MUS File Player Library V1.75

    By Guest

    DOOM, DOOM II, Heretic & Hexen MUS file player library.
    Supports Adlib, Sound Blaster (OPL2), Sound Blaster Pro II/16 (OPL3, stereo), Sound Blaster AWE32 (EMU 8000), Roland MPU-401 and Sound Blaster MIDI port. Can play music on the background. Can store MUS files into XMS or EMS to save conventional memory. Full C source included. Compiles under Borland C 3.1 (16-bit) and Watcom C 10.0 (both 16 and 32-bit). Ready-to-use pre-compiled libraries for every memory model included.
    

    11 downloads

       (3 reviews)

    Submitted May 6, 1996

17. Mus2midi version 1.0

    By Guest

    This is the elusive version 1.0 of the Mus2midi tool. The author, just_joe has a web site available here: http://joakim.erdfelt.com/pmwiki/pmwiki.php/Projects/Mus2Midi
    
    However, version 1.0 is mysteriously missing from his site.
    
    Repeated attempts to contact the original author of the software has failed, and this version has the best success of running on WinXP and handling large, complex MUS files.
    
    It is also important to use in conjunction with Csabo's wonderful XWE utility located at http://www.doomworld.com/xwe.
    

    91 downloads

       (20 reviews)

    Submitted January 29, 2005

18. mus2midi.zip

    By Guest

    It's just what the file-name sounds like. Will convert .MUS files to MIDI files.
    

    90 downloads

       (57 reviews)

    Submitted December 9, 1994

19. MUSTOOL Utility for DOOM II

    By Guest

    This small utility has been done generally having in mind Bill Neisius's DMMUSIC utility. However, dince Bill haven't done a DMMUSIC for DOOM II yet, I wrote it myself. But the syntax is very similar to DMMUSIC.
    

    9 downloads

       (5 reviews)

    Submitted April 30, 1995

20. Quick MUS->MID file converter v2.0

    By Guest

    o 30 times faster than MUS2MIDI by Joakim Erdfelt (no offense meant ! ;) ie conversion is instantaneous
    
    o Real-time MIDI file compression
    - up to 25% disk space safe
    - a compressed MIDI file is usable as it is
    - your sound card can get its breath back !
    Compression can be disabled if wanted.
    
    o Compiled with GCC => protected mode (all memory is available, not only 640 KB)
    
    o Size of track buffers can be set to a different value from default (64 KB)
    

    24 downloads

       (4 reviews)

    Submitted January 24, 1996

21. SoundRip v1.0

    By Guest

    Rip your DOOM / DOOM ][ / Heretic samples into a single patch WAD! Great for you guys who use more than one soundset (I do :)!
    

    10 downloads

       (0 reviews)

    Submitted August 6, 1995

22. The DMAuD Sound Extractor v1.2

    By Guest

    Here is a nifty utility that I whipped up to extract all of the sounds in a PWAD file after spending half an hour doing it one sound at a time using DMAuD. All it does is call DMAuD and send it parameters along with the file name you supply.
    

    41 downloads

       (1 review)

    Submitted September 2, 1994

23. XMUS

    By Guest

    XMUS is a MUS (music files from DOOM, HERETIC, etc) extractor. It can extract MUS files from anyone file (IWAD, PWAD, or other) if has. Try it!
    

    2 downloads

       (0 reviews)

    Submitted September 3, 1995