Krull Posted March 1, 2018 (edited) . Edited September 2, 2023 by Krull 0 Share this post Link to post
1 Empyre Posted March 2, 2018 The simplest thing to do is to make sure the switch is far enough away from the front of the lowering wall that the player can't reach the switch until the wall is out of the way. 1 Share this post Link to post
1 SaladBadger Posted March 2, 2018 I believe you can use a WR line type placed on the line between you and the switch to waste the use (Doom doesn't check if a special actually exists for this, so you could also set it to a special that doesn't exist, I think, though be careful as you might accidentally set a boom generalized type, or some other port's special. Using something known like a lift might be safest). You can make it do something useless like activate a platform outside of the field of play. Note that frustratingly, GZDoom does not work with this trick and you can still use through it. 0 Share this post Link to post
1 scifista42 Posted March 2, 2018 4 hours ago, InsanityBringer said: you can use a WR line type placed on the line between you and the switch to waste the use [...] GZDoom does not work with this trick and you can still use through it. If you use a SR line type instead of WR, it will work even in GZDoom. 0 Share this post Link to post
1 alowe Posted March 5, 2018 On 3/2/2018 at 1:05 AM, Empyre said: The simplest thing to do is to make sure the switch is far enough away from the front of the lowering wall that the player can't reach the switch until the wall is out of the way. Coincidently this is the solution I used recently. What surprised me was I had to place the line 52 units away before it stopped being triggerable before it was meant to be. Doomguy got long arms! 2 Share this post Link to post
0 Krull Posted March 2, 2018 (edited) . Edited September 2, 2023 by Krull 0 Share this post Link to post
0 Pegleg Posted March 2, 2018 1 hour ago, Krull said: Sunder didn't have this problem so why should I? This is a glitch. If the thin slow wall concealing a switch that you can't switch early was already done in Sunder, why not open the map and see how the effect was achieved? 1 Share this post Link to post
0 Krull Posted March 2, 2018 (edited) . Edited September 2, 2023 by Krull 0 Share this post Link to post
0 yakfak Posted March 2, 2018 you could punish the player for trying to bump switches by having a line closer to them set to repeatedly turn off all the lights in the room :P~ 2 Share this post Link to post
0 Empyre Posted March 2, 2018 7 hours ago, scifista42 said: If you use a SR line type instead of WR, it will work even in GZDoom. Wouldn't that make the switch unusable even after the wall has lowered? If your using a port that supports it, you could use ACS. Make the switch with a tag but no special on it at all, and have a script lower the wall and wait until the wall has finished lowering before putting the special on the switch. I have done something similar before. 0 Share this post Link to post
0 Krull Posted March 5, 2018 (edited) . Edited September 2, 2023 by Krull 0 Share this post Link to post
0 PepsiBepsi Posted March 7, 2018 I know the question has already been answered, but I believe there is an option where you can set a linedef to block use actions. That might not be available in all formats though lol 0 Share this post Link to post
.
Edited by KrullShare this post
Link to post