Gez Posted January 24, 2010 A new official version of ZDoom is available, 2.4.1. As typical, this is mirrored by a new version of GZDoom, 1.4.2. I said it was mirrored! Not many fancy features this time, these are mostly bug fix releases.Floor waggle effects are smoother now Sliders in the menus work correctly now Negative numbers in the alternate HUD have their minus sign at the right place now Menu option scales better in widescreen resolution Player setup menu looks better in non-Doom games Moving cameras work correctly again Polyobjects glitch a bit less now The internal nodebuilders works correctly now with certain troublesome maps Strife conversations fixed and improved Many nitpicky fixes in Strife (switch sounds, messages, etc.) Action Doom 2 and Harmony can now use idclev, and they have their Autoload section in the .ini MAPINFO "ResetInventory" keyword now works as expected If you experience input problems when using ZDoom through something such as Wine, set the norawinput console variable to "true". GZDoom fix: sprites are no longer oddly stretched or squashed on graphic chipsets that do not support non-power-of-two textures.New features do include these two things:When saving, if you use a game controller rather than the keyboard, an input grid now appears and lets you enter a name and actually save. The input grid remains off if no controller is plugged, or if it isn't used when saving the game. A new control lump type has been added. GAMEINFO is extremely simple to use. 0 Share this post Link to post
Chrispaks Posted January 24, 2010 I like Zdoom updates. Though GZdoom always likes putting that boundary that far out there. 0 Share this post Link to post
lupinx-Kassman Posted January 24, 2010 Cool. But there go all of my saves again :[. 0 Share this post Link to post
Gez Posted January 24, 2010 I think ZDoom 2.4.0 saves can be loaded by ZDoom 2.4.1. I don't remember changes to the serializer and the minsavever variable hasn't been changed. 0 Share this post Link to post
hardcore_gamer Posted January 24, 2010 Gez said: New features do include these two things: When saving, if you use a game controller rather than the keyboard, an input grid now appears and lets you enter a name and actually save. The input grid remains off if no controller is plugged, or if it isn't used when saving the game. Wait a min, does that mean that it is now actually possible to use a controller (in my case, a Xbox 360 controller) to save the game so you won't have to walk all the way towards the keyboard just to hit the quick save button? Please tell me that this is the case! I sometimes connect my laptop to my 42 inch LCD TV and play Doom on that using my Xbox 360 controller and begin able to save my game using my controller instead of the F6 key would make it much more comfortable to play. 0 Share this post Link to post
Bastet Furry Posted January 24, 2010 # A new control lump type has been added. GAMEINFO is extremely simple to use. Ah, cool feature! 0 Share this post Link to post
Graf Zahl Posted January 24, 2010 lupinx-Kassman said:Cool. But there go all of my saves again :[. The savegames haven't been changed significantly for a long time now. The last breaking change was 4 months ago - long before even thinking about a 2.4.x release. 0 Share this post Link to post
Gez Posted January 24, 2010 Also, ZDBSP has been updated as well. Features the same fixes as those in ZDoom 2.4.1's internal nodebuilder, plus another fix when building nodes for several maps in a single wad file. hardcore_gamer said:Wait a min, does that mean that it is now actually possible to use a controller (in my case, a Xbox 360 controller) to save the game so you won't have to walk all the way towards the keyboard just to hit the quick save button? I think so. You just need to bind some of your controller button to the "quicksave", "quickload", "menu_save" and/or "menu_load" commands. 0 Share this post Link to post
hardcore_gamer Posted January 25, 2010 Gez said: I think so. You just need to bind some of your controller button to the "quicksave", "quickload", "menu_save" and/or "menu_load" commands. Great! If true then this will make it all the more easier and fun to play the PSX Doom TC on Gzdoom (assuming that Gzdoom supports the same features as the new Zdoom of course)! EDIT: I just downloaded the latest version of Gzdoom and while some things were different i have so far found no option that allows me to save my game using the controller. Can somebody point out what to do? Anyone? 0 Share this post Link to post
phi108 Posted January 25, 2010 In the console, you can bind things that arent shown in the controls menu. "Bind q quicksave" would bind quicksave to the q key. I think "bind joy# quicksave" would work for joystick buttons. Bind a joystick button to something else in the controls menu to see what it's called, then use that button's name to bind quicksave to it. 0 Share this post Link to post
NaturalTvventy Posted January 25, 2010 now my zdoom is broken. i tried loading doom.wad and doom2.wad and i get this OS: Windows XP (NT 5.1) Build 2600 Service Pack 2 M_LoadDefaults: Load system defaults. Gameinfo scan took 0 ms W_Init: Init WADfiles. adding C:/ZDoom/zdoom.pk3, 520 lumps adding ./doom2.wad, 2919 lumps I_Init: Setting up machine state. CPU Speed: 2095 MHz CPU Vendor ID: GenuineIntel Name: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz Family 6, Model 23, Stepping 10 Features: MMX SSE SSE2 SSE3 SSSE3 I_InitSound: Initializing FMOD FMOD Sound System, copyright © Firelight Technologies Pty, Ltd., 1994-2009. Loaded FMOD version 4.26.15 V_Init: allocate screen. S_Init: Setting up sound. ST_Init: Init startup screen. P_Init: Checking cmd-line parameters... G_ParseMapInfo: Load map definitions. S_InitData: Load sound definitions. Texman.Init: Init texture manager. ParseTeamInfo: Load team definitions. LoadActors: Load actor definitions. Tried to register class 'AlienSpectre1' more than once. Tried to register class 'AlienSpectre3' more than once. Tried to register class 'Macil2' more than once. No ActorInfo defined for class 'AlienSpectre1' No ActorInfo defined for class 'AlienSpectre3' No ActorInfo defined for class 'Macil2' Execution could not continue. 3 errors during actor postprocessing sad face :( gonna go try to hunt down the old version... 0 Share this post Link to post
hardcore_gamer Posted January 25, 2010 phi108 said:In the console, you can bind things that arent shown in the controls menu. "Bind q quicksave" would bind quicksave to the q key. I think "bind joy# quicksave" would work for joystick buttons. Bind a joystick button to something else in the controls menu to see what it's called, then use that button's name to bind quicksave to it. Ah! That did the job thank you! But are the bindings permanent or do i have to repeat them each time a start the game? 0 Share this post Link to post
phi108 Posted January 25, 2010 Permanent. They are stored in the zdoom .ini file, with all other controls and user settings. 0 Share this post Link to post
GreyGhost Posted January 25, 2010 NaturalTvventy said:now my zdoom is broken. i tried loading doom.wad and doom2.wad and i get this I get the Doom2 sky in Doom or vice versa - depending on the load order. LoadActors: Load actor definitions. Tried to register class 'AlienSpectre1' more than once. Tried to register class 'AlienSpectre3' more than once. Tried to register class 'Macil2' more than once. No ActorInfo defined for class 'AlienSpectre1' No ActorInfo defined for class 'AlienSpectre3' No ActorInfo defined for class 'Macil2' 3 errors during actor postprocessing Which wad are these actors in? 0 Share this post Link to post
duvel Posted January 25, 2010 Those are in Strife. Something goofy is going on with whatever you're loading ZDoom with. Maybe you have an old ZDoom pk3? 0 Share this post Link to post
phi108 Posted January 25, 2010 Yes, you might have an old pk3. I just started the new ZDoom with an old pk3 and it gave a Macil error. Copy EVERYTHING in the ZDoom 2.4.1 zip into your ZDoom folder, and overwrite all old files. 0 Share this post Link to post
NaturalTvventy Posted January 25, 2010 yea i did that (replace all). it still gave me the error. I'm sticking to the older version as there isn't a big enough difference for me to worry about it. ps. i don't have strife on my computer, FYI 0 Share this post Link to post
Graf Zahl Posted January 25, 2010 You definitely load the wrong ZDoom.pk3 with the EXE you are using. If you copied all files from the installation make sure that ZDoom doesn't load its files from some other directory. 0 Share this post Link to post
Subatomic Posted January 25, 2010 Hmm, no errors for me. I deleted the previous version entirely, then installed the new one. I haven't had any issues. WinXP SP3 GeForce 9600GT 0 Share this post Link to post
Jello Posted January 26, 2010 Fantastic. For whatever reason my Doom didn't survive the transfer to Vista 64 a year ago, every time I tried a new zdoom version it would crash while loading, seems to work fine now. Kudos to whatever they did that fixed it, I can now play Doom again. 0 Share this post Link to post
wolf739 Posted January 26, 2010 we are all probably glad that you can play Doom again good sir... I downloaded zdoom about 2 months ago and I have Vista x64, It worked fine for me 0 Share this post Link to post
Bastet Furry Posted January 26, 2010 Jello said:Fantastic. For whatever reason my Doom didn't survive the transfer to Vista 64 a year ago, every time I tried a new zdoom version it would crash while loading, seems to work fine now. Kudos to whatever they did that fixed it, I can now play Doom again. You had tried compatibility mode? BTW: What can be done to improve sound on Linux (Ubuntu 9.10 AMD64)? Wait patiently for the move to OpenAL? ;) 0 Share this post Link to post
Graf Zahl Posted January 26, 2010 Bastet Furry said:Wait patiently for the move to OpenAL? ;) Won't happen. 0 Share this post Link to post
Fletcher` Posted January 26, 2010 I haven't had time to fully test this yet but I think they broke strifedialogs again. 0 Share this post Link to post
Graf Zahl Posted January 26, 2010 Grrr... I'm gonna kill this nitpick Deathlike2 eventually because he makes Randy do all kinds of shit to fix his non-bugs... What's wrong by the way? 0 Share this post Link to post
Gez Posted January 26, 2010 Dialogues in Strife itself work fine for me. Haven't tested modded dialogues, though. 0 Share this post Link to post
Fletcher` Posted January 26, 2010 Graf Zahl said:What's wrong by the way? They don't show up at all in r2129. The last version I was using that they worked in was r1935. Since then I haven't changed anything in the script or anything related to it (be it the actors, map or dialog script). 0 Share this post Link to post
Graf Zahl Posted January 26, 2010 No problems here with the latest build. 0 Share this post Link to post