Dexiaz Posted September 30, 2022 3 hours ago, Paf said: udmf support when lmao Doom in Hexen is enough. It's harder to work in this format after UDMF, but I'm fine to cope with that. BTW, I do remember I saw someone tried to create KDIZD but for DOS. I can't find this thread here...This project might be also useful with ACE Engine, you know. 1 Share this post Link to post
kgsws Posted September 30, 2022 (edited) 10 hours ago, Paf said: udmf support when I was thinking about that but ... I don't like parsing too much text in DOS Doom which might be running on < 100MHz PCs. It is possible though. We need something like BUDMF - binary universal doom map format :D 6 hours ago, Dexiaz said: Doom in Hexen is enough. It's harder to work in this format after UDMF, but I'm fine to cope with that. I hope you mean what ZDoom does (creating new line actions) and not that weird hack what Crispy Doom did (re-using doom actions? what the ...). But yes, Hexen map format (ZDoom style) is planned, along with ACS. But only for V3. Which will be way later, after i take a break ... and if V2 is successful. V2 only supports Doom map format. That is because ZDoom adds a ton of new actions. It is not hard at all to implement those, it's just time consuming. But if you can accept a limited subset of actions (basic doors, basic lifts, basic floors/ceilings [and polyobjects]) i might extend V2 release plans and add this - i have already implemented Hexen map format with limited subset of actions in ACE (see doom-in-doom video, it even has working polyobjects). Any new ZDoom line actions would be supported in DECORATE too. So it might be worth it. 6 hours ago, Dexiaz said: BTW, I do remember I saw someone tried to create KDIZD but for DOS. I can't find this thread here...This project might be also useful with ACE Engine, you know. Now that would be pretty cool demo for ACE Engine. I also have a few mods on my mind that i would like to "port" for ACE Engine. I would have to make changes to maps since some features (like slopes) are not planned at all though. But it is probably better to ask author(s) first ... Anyway, MAPINFO implementation is going well. I should be able to finish it during the weekend. It will support multiple episode definitions! 5 Share this post Link to post
Dexiaz Posted October 1, 2022 5 hours ago, kgsws said: But it is probably better to ask author(s) first ... I think the author will do it by himself, the problem is I can't find the project now, like it's just gone, huh. 0 Share this post Link to post
Gez Posted October 1, 2022 12 hours ago, Dexiaz said: BTW, I do remember I saw someone tried to create KDIZD but for DOS. I can't find this thread here... Do you mean Essel's KDIKDIZD? Or Marn's KDIKDIKDIZD? 1 Share this post Link to post
Dexiaz Posted October 1, 2022 (edited) @Gez, no. Both are not that I'm looking for. There were screenshots from Z1M6 with downgraded visuals (due to visplanes, I suppose) and runned on Dosbox. I was thinking "I should play it later", but now I can't find it at all. And the thread is not that old. Threads you've posted are already 10 years old and screens looks crappy. P.S.: I'm sure I saw a post by Doomkid in this kdizd demake thread, but I'm also didn't find his post in history. Maybe I'm blind, or I lost my mind and everything I saw is my imagination. Edited October 1, 2022 by Dexiaz 0 Share this post Link to post
Paf Posted October 1, 2022 17 hours ago, kgsws said: I was thinking about that but ... I don't like parsing too much text in DOS Doom which might be running on < 100MHz PCs. It is possible though. We need something like BUDMF - binary universal doom map format :D Heh, yeah. BTW, that was actually a joke. 1 Share this post Link to post
kgsws Posted October 2, 2022 On 10/1/2022 at 7:47 PM, Paf said: Heh, yeah. BTW, that was actually a joke. Yeah, i know. It's just that i have actually considered doing this at some point. Well, progress is going well. MAPINFO is working for maps and clusters. Episode definition is missing. Meanwhile i have updated hitscan collisions. Now it feels even more modern. Do you know what's happening here? Also, custom puffs are supported. With crash state and PUFFONACTORS. NOTE: I have not added heretic weapons. This is a fresh DECORATE definition in custom WAD. 13 Share this post Link to post
Dexiaz Posted October 3, 2022 20 hours ago, kgsws said: Do you know what's happening here? On left - destroyed wooden barrel? On right - looks like a fried corpse. On center - aiming on floor without moving camera. In any case, looks superb! 1 Share this post Link to post
user76828904 Posted October 4, 2022 @kgsws Is there charred monsters In the farest room? 1 Share this post Link to post
kgsws Posted October 5, 2022 On 10/3/2022 at 10:09 PM, Dexiaz said: On left - destroyed wooden barrel? On right - looks like a fried corpse. On center - aiming on floor without moving camera. In any case, looks superb! Thanks! On center - actually it's aiming with mouse. But, you can see hitscan collision with floors. Yes, doom does not have hitscan collisions with floors. You won't likely notice because chance of shooting floor or ceiling is very small in the original game. 16 hours ago, user76828904 said: @kgsws Is there charred monsters In the farest room? Yeah, those are decorations. It's just a temporary test map for stuff, but i still tend to add unnecessary details. Here's a quick MAPINFO update. Custom episodes and custom map, with different sky texture. Maps no longer have to have fixed name (like MAP01, E1M1) but can be anything, like in ZDoom. This one is called TITLEMAP ... (which might give you another hint) 12 Share this post Link to post
Dexiaz Posted October 5, 2022 2 hours ago, kgsws said: This one is called TITLEMAP ... (which might give you another hint) Reminded to me TITLEMAP existed in Doom Alpha, lmao. Oh yeah, we can also create a Doom Alpha mod not for ZDoom sourceports, hehe. 0 Share this post Link to post
taufan99 Posted October 5, 2022 17 minutes ago, Dexiaz said: Oh yeah, we can also create a Doom Alpha mod not for ZDoom sourceports, hehe. Oh God yes! I wanna see Doom Delta for DOS. 3 Share this post Link to post
JXC Posted October 5, 2022 Does ACE run in Chocolate Doom, RUDE, and Crispy Doom? 0 Share this post Link to post
Dexiaz Posted October 5, 2022 Oh, this thread is just 3 pages, it was too hard to read them? :\ No, at present time it's not compatible with sourceports. 1 Share this post Link to post
kgsws Posted October 6, 2022 On 10/5/2022 at 7:38 PM, JXC said: Does ACE run in Chocolate Doom, RUDE, and Crispy Doom? But ACE additions could be ported to those ports. And i would love to have Crispy doom with those features. It's time to leave DEHACKED behind and enter DECORATE world. UPDATE: Here's a small change. Just a few lines of code ... 18 Share this post Link to post
Dexiaz Posted October 7, 2022 6 hours ago, kgsws said: UPDATE: Here's a small change. Just a few lines of code ... IMPOSSIBRU!!! ACTORS IN DOS DOOM ARE INFINITY TALL!!!!!1111111111111oneoneone Just joking, I do know how actors' height "work" in the original engine. Nice addition! WAIT. IT'S POSSIBLE TO MAKE BRIDGE ACTORS, RIGHT? 3 Share this post Link to post
Rykzeon Posted October 7, 2022 3 hours ago, Dexiaz said: IMPOSSIBRU!!! ACTORS IN DOS DOOM ARE INFINITY TALL!!!!!1111111111111oneoneone Just joking, I do know how actors' height "work" in the original engine. Nice addition! WAIT. IT'S POSSIBLE TO MAKE BRIDGE ACTORS, RIGHT? Flying actors intensifies 4 Share this post Link to post
user76828904 Posted October 7, 2022 Can we expect something like the gravitational anomaly disks from Rise of The Triad? 1 Share this post Link to post
Dark Pulse Posted October 7, 2022 6 hours ago, user76828904 said: Can we expect something like the gravitational anomaly disks from Rise of The Triad? DECORATE support would mean stuff like that should be possible I'd think. 0 Share this post Link to post
kgsws Posted October 9, 2022 On 10/7/2022 at 3:55 AM, Dexiaz said: Just joking, I do know how actors' height "work" in the original engine. Nice addition! It was just like 14 lines of (simple) code. There might be some edge cases where something breaks. I did it because of another planned feature that pretty much requires this. On 10/7/2022 at 4:32 PM, user76828904 said: Can we expect something like the gravitational anomaly disks from Rise of The Triad? Yes, now with thing over thing support ... But why would you need that if you can have 3D floors? By the way, V2 will be delayed again ... because i can't stop myself adding new features. 22 Share this post Link to post
Dexiaz Posted October 9, 2022 3 hours ago, kgsws said: By the way, V2 will be delayed again ... because i can't stop myself adding new features. I'm fine with that. MORE FEATURES TO BREAK THE LIMITS \m/ 1 Share this post Link to post
user76828904 Posted October 9, 2022 15 hours ago, kgsws said: But why would you need that if you can have 3D floors? Because I like to complicate myself. :) 1 Share this post Link to post
forgettable pyromaniac Posted October 9, 2022 15 hours ago, kgsws said: Is that a sky transfer i see? :) 0 Share this post Link to post
kgsws Posted October 9, 2022 (edited) Those GIFs i posted were proof-of-concept mockups (well it was rendered in DOS, but sides were mid textures). But now, sorting is fully working. There are no collisions, yet. And it works on real hardware. 7 hours ago, forgettable pyromaniac said: Is that a sky transfer i see? :) That's a custom sky set using MAPINFO. https://zdoom.org/wiki/MAPINFO/Map_definition see sky1. (no scrolling though! ... yet) 7 Share this post Link to post
forgettable pyromaniac Posted October 10, 2022 34 minutes ago, kgsws said: That's a custom sky set using MAPINFO. https://zdoom.org/wiki/MAPINFO/Map_definition see sky1. (no scrolling though! ... yet) Broooooooooooooooooooooooooooooooooo this shit is wack and i love it. 0 Share this post Link to post
kgsws Posted October 16, 2022 2 hours ago, Rykz said: ACE Engine surpass BUILD Engine when? Heh, you decide! But there are things that can't be added. Like rotating sectors. (remember those giant cogs in Duke3D) Now, after a few days, i have full collisions with 3D floors, including hitscan. Well, sight check is not added (monsters will try to attack you trough solids), and i do not know how to address that ... yet. But meanwhile, i have ditched unchained mode, which allows me to easily write new rendering functions. For comparison: And, of course, it works on 3D floors ... I do not plan to add water physics in V2, but for visual effects ... 20 Share this post Link to post
user76828904 Posted October 16, 2022 3 hours ago, Rykz said: ACE Engine surpass BUILD Engine when? An engine to surpass Build's cogs. 5 Share this post Link to post
Rykzeon Posted October 16, 2022 3 hours ago, kgsws said: But meanwhile, i have ditched unchained mode, which allows me to easily write new rendering functions. Damn. First, you demonstrated Doom 64 GUI. Second, animated switches from Hexen. Third, savegame that looks like from Blood. Then, inventory system and functional Alt-Attack. And now, you have full control to the rendering functions, which means you can add stuff like 3D floors, Floor/Ceiling Portals, Line Portals, and maybe more richer palette translation for sprites :p 3 hours ago, kgsws said: Heh, you decide! But there are things that can't be added. Like rotating sectors. (remember those giant cogs in Duke3D) Perhaps with some mapping tricks & visual illusion, its possible (depends on how large the cog's gap is, tbh I forget how big it was). 2 Share this post Link to post