MLook and EDGE and Strafing and Blah

[MasterOFDeath]

When you mouselook in EDGE by holding down the "mouselook" key, you strafe when you move from side to side. Is there a way to turn this off?

[DarkknightXC]

I cannot reproduce this problem (I checked since I have mlook always on and don't use this normally). Check that the strafe key is not bound to the same key as your mlook key. Otherwise post your query on the EDGE forums:
http://sourceforge.net/forum/?group_id=2232

...for further help.

[MasterOFDeath]

Not bound to my strafe key, don't always have mlook on...

I have mouse2 bound to MLook so I can look up and down. I would always have it on if it didn't do this.

[DarkknightXC]

MasterOFDeath said:

Not bound to my strafe key, don't always have mlook on...

I have mouse2 bound to MLook so I can look up and down. I would always have it on if it didn't do this.

Mlook can be switched on premanently by setting the "Mouse Y-Axis" under "Mouse controls" to "MLOOK". Anything further than the EDGE website so I can determine if this is an issue with your config or the engine. I'm only visiting here...

[leileilol]

Isn't there a Lookstrafe option? If so, turn that sucker off.