kyussfia Posted March 23, 2012 hi all pls help me.I want to create a door.it ok.i want to make it passable only with a key,(red).i set this action for the lines. i placed a red skull at another room.at test, i pick up it and go to the "red" door,try to open it but i f@cked...What is the problem? And my sec. problem: i create a big a sectro with a large bloodpool,pool high is 8 ,the other place is higher.iwhen u arrive this sectro u must go through the sector, u'll find a switch,press is and th 1./4 of the bridge raised up to the higher-normal- floor-.u enter this part of the bridge and a line activate a floor sector behind u,to raise up,there is a switch,press it and the 2./4 of the bridge doesnt want to raise up to the higher floor,just change the text from blood to the bridge text,but its high is at 8.why? why doesnt itraised up to the first part of bridge? plas help me quick.thx 0 Share this post Link to post
Jodwin Posted March 23, 2012 kyussfia said:i f@cked...What is the problem? You shouldn't fuck. That's known to cause problems. 0 Share this post Link to post
Snakes Posted March 23, 2012 I'm tempted to run this through a translator to see if it'll convert it to English for me, but alas, I'm on the clock and have better things to do with my time... Like continue procrastinating... off to Google Translate! 0 Share this post Link to post
PRIMEVAL Posted March 23, 2012 Jodwin said:You shouldn't fuck. That's known to cause problems. It risks creating another one of these thingsd. 0 Share this post Link to post
kyussfia Posted March 23, 2012 sorry for my bad english,but i was tired and angry.so.i cant make doors what wants a key.Blue,red,or yellow,none.i took down a key,i create a door for it,with in the effects option,door(a colour) open wait close.it didn't work.and the bridge problem.please try to imagine a map,like an R.but it is strange,the part of this R,is like a D just,reversed. it is the large area of this large sector.what remain from R,i divide 4 parts.First i use a switch for the first part of the bridge,after i get a new switch,i use the new one ,but the second part of the bridge doesn't want to raise up,just appears.And i used i think action 20 - raise the floor to next higher floor.Now? 0 Share this post Link to post
Krispy Posted March 23, 2012 You need this. http://www.youtube.com/watch?v=BBTmjEBeRNI And this. http://www.broderbund.com/p-180-mavis-beacon-teaches-typing-platinum-25th-anniversary-edition.aspx 0 Share this post Link to post
gggmork Posted March 23, 2012 door: it will raise to (4?) below the lowest neighboring sector ceiling. You might have a sector touching it with a ceiling near or below ground level so it doesn't work. bridge: if you chose 'floor raise to highest neighbor', make a 'dummy' square sector outside the map. Select bridge piece 2 & the dummy, choose 'join sectors'. Now attach another square to side of dummy and give it the floor height you want. 0 Share this post Link to post
GreyGhost Posted March 24, 2012 Is the door linedef facing away from you? In 2D edit mode you'll notice in the centre of each linedef a short line sticking out at right-angles. That indicates which way the front sidedef is facing, and it's the front sidedef you have to push in order to open a door or operate a switch. Also, check that the floor and ceiling heights in your door sector are both set to floor height. 0 Share this post Link to post