Arioch Posted August 17, 2001 Fanatic has updated the EDGE site with the information that EDGE 1.26 has been released! The changelog for this latest version can be found at the EDGE site, and downloads are available for the win32, DOS, and linux versions. 0 Share this post Link to post
Aardappel Posted August 17, 2001 I have tried -bpp 4 and -bpp 32, to no avail. It seems to insist on 16bit mode (gledge). I run all games in 32bit, shouldn't have to swap display mode just for edge... 0 Share this post Link to post
Swedish Fish Posted August 17, 2001 BTW, was I drugged to hell or what happened to EDGE 1.25? I thought that was the next big version. 0 Share this post Link to post
Cory Posted August 17, 2001 Fuck.. there goes my weekend. I hope it's somewhat non time-consuming to convert from version 1.24 0 Share this post Link to post
Aardappel Posted August 17, 2001 some of these are engine problems (gledge), others qdoom specific, sorry for the mix: - missing 32bit mode, as mentioned below - fov slider is nice, but doesn't work (introduces HOM beyond 90) - aim seems to "jump" when firing weapons. Don't say this is a feature or I'll cry. - I get very choppy fps, on a T900/512/GF2 (runs Q3 and any other game at silky smooth fps) - the tall elevator on e3m1 crashes the game repeatedly. - as I said with the test, and I'll say it again: lighting looks VERY bad. You combine textures that are very non-contrasting to cope with quake's lighting model, with an engine that cannot do contrasting lighting (well, it can, at the expense of polys). Result: the worst of both worlds in terms of lighting. Sorry for coming up only with bad points, sure there are many good points but they are more obvious :) 0 Share this post Link to post
Guest Fanatic Posted August 17, 2001 I'll look into those when I get home. The weapons kick when you fire them, this *is* a feature. I think I'll put in a request to turn this on or off in the menu system, can can see some people not liking it. 0 Share this post Link to post
boris Posted August 17, 2001 GLEDGE crashes when it tries to set the graphics mode (win2k) :~( 0 Share this post Link to post
boris Posted August 17, 2001 Bah, I have not had any problems with 1.25 WIP :| 0 Share this post Link to post
kristus Posted August 17, 2001 Aard: was that E3M1? I thought it was E3M2. Ohwell. Well. I think the view bump far to much up and down when you run. and the swimming is horrible. In E2M1's water secret I was like shot out of a cannon when I swam down that tube. I flew all the way across the room up on top of the waterfall. and in that map with the cracked nuke tube with the quad in it, I didn't see anything and I couldn't get out of it either. (probaly cause I couldn't see anything) Damn. I'm only complaining. BTW Marc. I'm very impressed by your maps. I don't think I've ever seen such extensive use of 3d objects before in a doom map.that must have been pretty time consuming making all that. 0 Share this post Link to post
Enjay Posted August 17, 2001 Well, 1.26 seems to address most, if not all the major problems I had with 1.25. It has a lot of nice new features that I spotted on a fairly quick run through too. The bobbing action when walking still seems a little severe when moving, especially strafe running though. I usually play in software mode, but I gave the GL mode a spin too. The thing shadows, that look like shadows in software mode, actually used the sprites in their full colour in opengl mode, so the enemies etc looked like they had another copy of themselves stuck to their feet. In GL mode the levels seemed to all be full brightness everywhere too. Mind you, I didn't play in GL mode long enough to see if there was some setting I was missing. 0 Share this post Link to post
Arioch Posted August 17, 2001 Seems to be a driver/renderer issue then. GL EDGE looks great to me. 0 Share this post Link to post
wavelength Posted August 17, 2001 Hey bud, your new version of Edge doesn't work: "DDF_MainReadFile: Unable to Open: '.language.ldf'" I want a working copy on my desk by 1900. 0 Share this post Link to post
Guest Fanatic Posted August 18, 2001 Make sure EDGE.WAD is in the same directory as EDGE32.EXE or GLEDGE32.EXE. If that's the case, what are you typing from DOS to run it? 0 Share this post Link to post
mystic Posted August 18, 2001 Damn, if its too slow on a 900mhz I wont even try it on my 233. 0 Share this post Link to post
Guest Fanatic Posted August 18, 2001 Runs incredibly well here. Ran fine on my P3 600 128 megs RAM, runs even better on my P3 1ghz 512 megs RAM. Most people have no problems with DirectX 8 and the lastest drivers available for their card. Dunno what else to say. 0 Share this post Link to post
bitstate Posted August 18, 2001 mystic : I run gledge on a p233 tnt2 and on the standard doom/doom2 levels framerate is quite normal. however in qdoom and cory's df3 demo framerate drops to almoust zero (does this in edge too). i have narrowed it down to some causes, one seems to be spawning alot of sprites, like the chaingun in immoral conduct. Firing that for some seconds and framerate is gone, likewise if the chaingunners ejects shells (ic again) 0 Share this post Link to post
Law Posted August 18, 2001 Ahh, saving. And I havn't found a bug with it yet (saving, that is). Problem is, I just can't be ARSED to convert DDF from 1.24 to 1.26. I wish it had backwards compatibility. 0 Share this post Link to post
bitstate Posted August 18, 2001 ... just found out, running qdoom with -noextra gives descent framerate...wicked 0 Share this post Link to post
Guest Striker Posted August 18, 2001 Turn off the autoaiming and the weapons will stop jumping the aim jumps wherever the autoaim is. 0 Share this post Link to post
Guest Fanatic Posted August 18, 2001 That stops rain on the first two levels and kills ALL ambient sounds, which can be a bitch on FPS on some systems. Always runs fine here tho. 0 Share this post Link to post
kristus Posted August 18, 2001 Hm, It's running great for me in OpenGL. a bit slow in Software at 800x600 though. I really liked the design of these levels. But I found the nukeage to be much prettyer in the Qdoom test version. now it was far to dark. 0 Share this post Link to post
Cory Posted August 18, 2001 I converted all my ddf from 1.24 to 1.26, and edge starts up fine and I can start a new game, but as soon as I do anything requiring a sound, like jump, fire a weapon, alert a monster, etc, I get to play Desktop Commander in 640x400 splendor. There are no errors or warnings given AT ALL, and the debug (-debugfile) text has nothing to say. I use 11025 khz mono sounds only (same as Doom), and there's nothing wrong with the player's states. It seems once I'm in the game (normal Doom2 maps), doing anything short of moving around (including pressing ESC), will crash. The wad contains weap/sfx/thing/atk/lang lumps only. I'm stumped.. It's probably something simple, but damned if I know what. 0 Share this post Link to post
Guest Fanatic Posted August 18, 2001 Sounds like you're using old GL nodes maybe? If you want, zip up your files and email them to me, or put them online for me to grab and test out. 0 Share this post Link to post
sirgalahadwizar Posted August 19, 2001 Hey fanatic, what ever happened to the proposed "beam weapons", or attacks that act like pistol shots but actually draw something on that trace attack rather than nothing (like a solid laser beam). ...been waiting for this for railgun implementation (i mean, hey, even a striong of puff objects would be nice). Im getting really sick of making projectiles have a speed of 100 or more and their puff objects are about a mile inbetween each other (and the fact that it is a projectile means that all of the puff objects are at different heights while they are rising, which totally gives away the effect). 0 Share this post Link to post
Guest Fanatic Posted August 19, 2001 We put in an attack special for tunneling, was that what you were looking for? You can also set the floating speed to 0, so the puffs don't raise. 0 Share this post Link to post
sirgalahadwizar Posted August 20, 2001 But the problem is that I want all of the puff objects to rise, but be at the same level while rising (it would be like the projectile travelled and hit something, and it's puff objects were frozen in time until the projectile hit, then all of them rose and animated at once). Also, to make it seem instantaneous i would have to set the speed upwards of 100 or more, and with even only 1 frame lasting 1 tic long leaving a puff object behind, the trail wont exactly be consistant... (it'll ahve big gaps between the puff objects, like at least 32 map units whereas 16 map units would be more ideal). ----- And does edge 1.26 have additive options? Because translucency is simply not enough. 0 Share this post Link to post