Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Idiotinforntofadesk

[Solved] Can't get switch doors to work

Recommended Posts

I've been trying to make a level where at one part the end door is only activated by a switch, but no matter what I try I just simply can't get it to work.

 

As you see the in the image, the switch and doors have the same tag, action, almost everything. Whenever I test it, go up the switch, and press E on the switch, the switch won't activate.

 

Anyone have any help with this? Really irritating. I'll probably find some way to get rid of this thread when I get a good response.

Screenshot (488).png

Share this post


Link to post

I hope that the ceiling has the same height as the floor. If the floor has a 0-unit height, the ceiling has to be the same value...

Share this post


Link to post

Does the door have its ceiling at floor level? Do you have the TAG 1 on the sector of the door, and not on its lines?

Share this post


Link to post

Well,you need tag door in sector mode and give same tag for switch. Also if you tagged door,it doesn't linedef actions because you control door with the switch and switch needs linedef action. 

Share this post


Link to post

This is a Doom map format, so the tag in the linedef has to be the same as the sector. And one more thing, we need to examine that map....just in case

Share this post


Link to post

He should post his map or do quick video so someone quickly could fix this. 

Share this post


Link to post

If this thread were in question subforum,you could mark the best answer. Now rename thread and write "fixed"

Share this post


Link to post
Guest
This topic is now closed to further replies.
×